Reinforcing Mesh | Cold-rolled hard-drawn wire | Pipe Mesh
print this page
email this page

Reinforcing Mesh


 Welded Mesh fabric used for reinforcement of concrete Features:
  • Manufactured in strict accordance to SNI No 070663 1384 standards
  • Welded Mesh mats can be detailed as either flat or bent sheets, depending on the job requirements
  • Welded Mesh reinforcement mats are the most commonly used form of prefabricated reinforcement and is particularly suitable for flat slab construction. Other designed application would be for pile caps retaining walls, shear walls as well as beams and columns
  • Welded Mesh reinforcement reduces construction time considerably
  • SABS designated fabric mats are standard welded reinforcement mats and can be scheduled simply by reference to the fabric type, sheet dimensions and bending shape code. (The reference is the nominal mass of the fabric in Kg/m2 x 100)
  • The wire used in WM reinforcement fabric has a characteristic strength (0.2% proof stress) of 485 MPa compared to 450 MPa for high tensile rebar. Fabric may be used at higher stresses than high tensile rebar resulting in a material saving of approximately 8%.

Welded mesh fabric reinforcement standard fabrics


Fabric Mesh Size Nominal Pitch of Wire Wire Sizes Cross Sectionalarea/m width Nominal mass/m2
Ref. No Main mm Cross mm Main mm Cross mm Main mm Cross mm Kg Supplied in
Square Mesh Fabric 888 200 200 12 12 566 566 8,88 Sheets only 6m x 2.4m
746 200 200 11 11 475 475 7,46
617 200 200 10 10 393 393 6,17
500 200 200 9 9 318 318 5,00
395 200 200 8 8 251 251 3,95
311 200 200 7,0 7,0 198 198 3,11
245 200 200 6,0 6,0 156 156 2,45
193 200 200 5,0 5,0 123 123 1,93 Sheets or rolls
100 200 200 4 4 63 63 1,00
Design Mesh Fabric 1085 100 200 12 8 1131 251 10,85 Sheets only 6m x 2.4m
943 100 200 11 8,0 951 251 9,43
772 100 200 10 7,0 786 198 7,72
655 100 200 9 7,0 636 198 6,55
517 100 200 8 6,0 503 156 5,17
433 100 200 7,0 6,0 396 156 4,33
341 100 200 6,0 5,0 312 123 3,41
289 100 200 5,0 5,0 246 123 2,89
Longitudinal Mesh Fabric 278 100 300 6,0 4 312 42 2,78 Sheets only 6m x 2.4m
226 100 300 5,0 4 246 42 2,26
133 100 300 4 4 126 42 1,33 Sheets or rolls 6m x 2.4m
Special Mesh 200 100 100 4 4 126 126 2,00
156 100 100 3,55 3,55 99 99 1,56

Structural fabric reinforcement design data

Cross sectional areas at various spacing mm2/m, mass at various spacing kg/m2.
DIA Area Mass Wire Spacing mm
mm mm2 kg/m 50 75 100 125 150 175 200 225 250 275 300 DIA
12 113,11
2262 1508 1131 905 754 646 566 503 452 411 377 12

0,888 17,76 11,84 8,88 7,1 5,07 5,07 4,44 3,95 3,55 3,23 2,96
11 95,05
1901 1267 950 760 583 583 475 422 380 346 317 11

0,746 14,92 9,95 7,46 5,97 4,26 4,26 3,73 3,32 2,98 2,71 2,49
10 78,55
1571 1047 786 628 449 449 393 349 314 286 262 10

0,617 12,34 8,23 6,17 4,94 3,53 3,53 3,09 2,74 2,47 2,24 2,06
9 63,63
1273 848 636 509 364 364 318 283 255 231 212 9

0,500 9,99 6,67 4,99 3,99 2,86 2,86 2,5 2,22 2 1,82 1,67
8 50,27
1005 670 503 402 287 287 251 223 201 183 168 8

0,395 7,9 5,27 3,95 3,16 2,26 2,26 1,98 1,76 1,58 1,44 1,32
7,0 39,6
792 528 396 317 226 226 198 176 158 144 132 7,0

0,311 6,22 4,15 3,11 2,49 1,78 1,78 1,56 1,38 1,24 1,13 1,04
6,0 31,18
624 416 312 249 178 178 156 139 125 113 104 6,0

0,245 4,9 3,27 2,45 1,96 1,4 1,4 1,23 1,09 0,98 0,89 0,82
5,0 24,63
493 328 246 197 141 141 123 109 99 90 82 5,0

0,193 3,86 2,57 1,93 1,54 1,11 1,11 0,97 0,86 0,78 0,71 0,64
4 12,57
251 168 126 101 72 72 63 56 50 46 42 4

0,099 1,98 1,33 1 0,8 0,57 0,57 0,5 0,44 0,4 0,36 0,33
Copyright © 2005 CRAsia